1GHz Digital Oscilloscope Digital Phosphor Oscilloscopes deliver a level of insight that makes dealing with complex signals elementary. Extensive user interface design has made the TDS784D truly intuitive to operate. Its familiar front panel layout offers dedicated vertical, horizontal and trigger controls. A graphical user interface with over 200 icons helps facilitate understanding and use of the advanced features. A color monitor helps rapidly distinguish between multiple waveforms and measurements. The high waveform capture rate of the TDS784D DPO, together with its high bandwidth and sample rate, delivers instantaneous signal feedback to show the true signals that other scopes may be missing. The DPO acquisition acquires over 1,000 times more data than traditional DSOs, allowing the capture of complex signals, reducing debugging times from hours to seconds. Channels can be transparently combined to achieve higher sample rates and longer record lengths. The record length can be optionally increased to 8 M points, providing a high-resolution representation of the signal over a long period of time. The TDS784D also provides wide dynamic range, flat response, fast overdrive recovery, calibrated DC offset, 1 mV/div sensitivity, 1 ns peak detect and internal calibration.
- Frequency/Bandwidth: DC to 1GHz
- Verticle Sensitivity: 1mV/div to 10V/div
- Channels: 4
- Sample Rate: 4 GSa/s (1 Channel)
- Sweep Speed: 10s/div to 500ps/div
- Display: Color
- Interface: GPIB, RS – 232C, Centronics
- Input Connectors: BNC Female
- Input Impedance: 1megaohm to 50ohms
- 100/240VAC, 45 – 440Hz Operation
The Tektronix TDS784D is a high bandwidth, high resolution digitizing oscilloscope. It features 29 automatic measurements with measurement statistics and has a timebase accuracy of 25 ppm. The unit also provides wide dynamic range, flat response, fast overdrive recovery, calibrated DC offset, 1 mV/div sensitivity, 1 ns peak detect and internal calibration.
Opt. 36 (TDS784D, TDS754D, TDS724D only) – Add 1 each P6139A passive probe. (4 standard on TDS754D, 2 standard on TDS724D).
Opt. 37 (TDS784D only) – Add 1 each P6245 active probe.
Opt. 1M – Add 130 K/channel memory length (500 K max on TDS794D, TDS784D, TDS754D) 250 K max (TDS724D).